Find Your Ring Size
Find your perfect fit.
1. Measure an existing Ring
You'll need a ring and ruler.
- Select an existing ring that's already your desired size.
- Take a ruler and place it across the middle of the ring at the widest point.
- Measure from one INSIDE edge to the other inside edge (in mm).
- If you measure on the outside, your ring will be too big.
- See the conversion table below to find your size.
2. Measure your Finger
You'll need paper, a pen, scissors and a ruler.
- Measure your finger when your hands are warm, cold weather can shrink your finger.
-
Wrap a thin strip of paper comfortably around your finger
below the knuckle, where you'd like your ring to sit. - Mark the piece of paper where the two ends meet.
- Lay out flat and measure with a ruler.
- Match the measurement to the closest Outside circumference column in the conversion table below.
- If your measured size is more than .2mm above one ring size we recommend to round up to the next ring size.
Ring Sizes:
US Canada |
UK Australia NZ |
Inside Ring Diameter |
Outside Finger Circumference |
6 |
L 1/2 |
16.5mm |
51.3mm |
7 |
N 1/2 |
17.3mm |
55.0mm |
8 |
P 1/2 |
18.2mm |
57.8mm |
9 |
R 1/2 |
19.1mm |
60.0mm |
Extra tips:
If your knuckle is particularly big, you may want to choose a bigger ring size so that the ring can fit over the knuckle.
If you're in between sizes, I suggest to choose the bigger size.
Easy Return: 100% risk free. Returns or exchanges are welcome within 7 days of purchase. Your ring must be unused and in the same condition you received it. See our Returns policy for further information.
Still not sure! Feel free to email me if you have any questions.